Beijing Bartool Tech Co., Ltd.
Master of Beverage Keg Dispenser, your satisfication, our priority!
Add to Cart
Stainless steel growler filler beer bottle tap de-foaming
Specification:
| Type | Beer Tap de-foaming |
| Material | Food Grade 304 Stainless Steel |
| Screw Thread | 5/8''G |
| Trim | Polished |
| Usage | For HomeBeer brewing |
This tap is very good to use in your store or restaurant when people need to take your fresh beer outside.
This type product only suitable for plastic bottle, Suitable Bottle Size is 28 mm diameter.
Durable construction, Long lifetime Easy to asemble and remove Connect with G5/8 thread beer tap
How to use it ?
1. Connect the bottle.
2. Open ( counter clockwise) the adjustable exhaust valve.
3. (The original state of the switch is in the middle) Turn left the switch , fill co2 into the bottle ( discharge o2 in the bottle )
4. Close the exhaust valve , keep the co2 filling into the bottle to prepare pressure. (it is a short time about 1-2 seconds for small bottle, do not make the process too long in case the bottle damaged )
5. Turn right the switch, fill beer.
6. Adjust the exhaust valve along with beer flow into the bottle . close valve when the bottle is full of beer.
7. Close the beer( turn the switch left ) , make the switch in original state.
8. Cap bottle and connect another empty bottle.
How to install it ?
1. connect the shank with the tower ( connect the tail tube with fermentation tanks with beer dispensing valve )
2. Connect the co2 inlet tube with co2 cylinder (fermentation tank) via food grade hose.
3. Connect the exhaust pipe with a short hose.
